Follow

Cobra 5

Firmware 
Version 1.6.066 June 2019

4 Channel - H6R404_COBRA066.bin
8 Channel - H6R408_COBRA066.bin
16 Channel - H6R416_COBRA066.bin

Emergency Firmware Upgrade
All Cobra 5 models - ZIP file
Use this when the unit isn't starting up, or when instructed by a technician. To install, open the zip file, drag the 'EMERGENCY_FW_UPGRADE' folder across to your USB stick. Turn off the machine and insert the USB, then turn back on. The screen will advise what to do next. This will return the unit to factory default settings. The contents of your USB stick should look like this:

Setup Guide PDF

 

Software

Netus Pro

NETUS-Pro for Windows (version 1.0.0.19, updated 18/06/2019)
NETUS-Pro for MacOS (version 1.0.0.19, updated 18/06/2019)
Default password to login to the program is '1111111'. This application is compatible only with Cobra H, V and 5 models.

 

VMS and RMS

Please note that the older Cobra software does not fully support the Cobra 5 and may not work properly.

Comments

Powered by Zendesk