First Step to setup a tour is to program in your preset positions to be used in the tour

To do this use a PTZ controller:-

1. Select the camera you wish to setup (ID: 001 for example) by pressing  '1' + 'CAM' on the controller
2. Move the camera to the first position you wish to set
3. Press 'Set' Then the number for the Preset Position e.g. '1' Then Press 'Set'
4. If you get a message asking to overwrite, Press 'Open' to accept or 'Close' to decline
5. Follow this process for position '2', '3' and so forth until you have all your positions programmed

Now you have your preset positions, you can create a Tour. Using you PTZ controller:

1. Enter the Camera Menu by pressing '95' + 'Preset'
2. A Menu will appear on the screen
3. Go 'Down' to Dome, then right to open sub menu
4. Go 'Down' to 'Tour', then go Right
5. You will be presented with the tour setup screen.
6. Move the cursor to the first  'XXX' position
7. Use the Zoom (3D Twist joystick) to scroll through the preset positions and choose first Preset
8. Move Right to the next 'XXX' position
9. Set this to the next preset
10. Proceed through the other positions you wish to set
11. Go down to the bottom of the screen and go right on 'Save and Exit'

That completes the Tour Setup. To call this Tour you need to use the camera presets to do it.

The Tour Preset are as below

71 to 78 Preset = Call Tour 1 to 8