To set the Internal recorder data and time on your spy watch, follow the process below. The time analogue time does not synchronise with the recorder, hence this needs to be programmed seperately.

- Connect the Watch via the USB to a Computer
- Open up the device
- You should see a folder called _REC, this is the root folder
- Create a file in the root folder called time.txt
- Open this file and enter the data and time in the format as below
   YYYY.MM.DD HH:MM:SS Y
 - For example the line should read
   2011.12.25 14:25:00 Y
- Save and Close the file
- Disconnect the watch from the USB
- Press the A Button for 3 seconds (blue light should come on)
- Do a test recording (press A button, blue light should flash x3, press A again)
- Reconenct the watch to the USB
- Open up the Root folder. time.txt should be gone.
- Go into the \_REC\100MEDIA folder
- The time stamp on the file should indicate if the time setup has gone through correctly

After setting the Data/Time, you may need to fromat the device or erase all the files in _REC\100MEDIA